Remapping the Renault Talisman (2016), 1.7 Blue dCi 120HP.
A Stage 1 remap on the 1.7 Blue dCi 120HP fitted to the Renault Talisman (2016) is firmly power-led: BHP climbs from 120bhp to 180bhp (a 50% gain), while torque rises a more modest 36.7% from 300Nm to 410Nm.
As a turbocharged diesel, this is exactly the kind of engine that responds well to remapping, and a transformative gain like this translates into stronger motorway pulling power and easier overtaking. These figures apply to 2016 models.
Typical remap gains for the Talisman 1.7 Blue dCi 120HP
Standard vs Remapped
Standard vs Remapped
- Power: 120bhp standard, 180bhp after a Stage 1 remap.
- Torque: 300Nm standard, 410Nm after a Stage 1 remap.
- This is a power-led gain: BHP increases by more than torque, widening the usable power band rather than boosting low-end pull.
- This is a turbocharged engine, which typically means further headroom exists beyond Stage 1 if hardware is upgraded.
- As a diesel, the practical benefit is mainly felt as stronger pulling power for towing and motorway overtaking.
- These figures apply specifically to 2016 models.
- These are Stage 1 figures only, achieved without any hardware changes.
Questions about remapping your Talisman 1.7 Blue dCi 120HP
How much power and torque does a Stage 1 remap add to the Renault Talisman (2016) 1.7 Blue dCi 120HP?
A Stage 1 remap typically takes the Renault Talisman (2016) 1.7 Blue dCi 120HP from 120bhp to around 180bhp, and torque from 300Nm to around 410Nm. This is a transformative gain achieved entirely through software, with no hardware changes required.
Is the Renault Talisman (2016) 1.7 Blue dCi 120HP a good candidate for remapping?
Generally, yes: as a turbocharged engine it has the headroom to respond well to a quality remap, and the transformative gain shown here reflects that. The main caveats are condition, not the engine itself, a healthy service history, no outstanding fault codes, and (for diesels) a clear DPF and EGR are what actually determine whether this particular car is ready for a remap.
Will remapping affect the warranty on my Renault Talisman (2016)?
A manufacturer can only void the parts of a warranty that the remap directly affects, not the entire vehicle, under the Consumer Rights Act and EU Block Exemption principles. In practice, on a Renault Talisman (2016) 1.7 Blue dCi 120HP this usually means engine and transmission-related claims are the ones worth discussing with a reputable tuner before booking.
What should I check before booking a remap for my Renault Talisman (2016) 1.7 Blue dCi 120HP?
Before booking, confirm the tuner uses a custom or bespoke file rather than a generic off-the-shelf map, ask whether they do a pre-remap health check, and check service history and mileage on your specific Renault Talisman (2016). For a diesel like this one, also check the DPF and EGR are in good working order, since a generic remap on a struggling emissions system is where problems tend to start.
What's the difference between a Stage 1 and Stage 2 remap for the 1.7 Blue dCi 120HP?
Stage 1 is software-only and is what the figures on this page reflect. Stage 2 builds on that, but on a turbocharged engine like this, Stage 2 usually adds further gains but requires supporting hardware such as an upgraded intake or exhaust, so it is a separate conversation with a tuner rather than an automatic next step.
Will remapping my Renault Talisman (2016) affect my insurance?
Yes, always, a remap is a modification and must be declared to your insurer regardless of size. Given this transformative gain on the 1.7 Blue dCi 120HP, expect a likely premium increase, and it is worth getting a quote from a specialist modified-vehicle insurer before booking the remap itself.