Audi remapping BHP and Torque gains

Remapping the Audi TT (2018), 45 TFSI 245HP.

A Stage 1 remap on the 45 TFSI 245HP fitted to the Audi TT (2018) is firmly power-led: BHP climbs from 245bhp to 320bhp (a 30.6% gain), while torque rises a more modest 21.6% from 370Nm to 450Nm.

As a turbocharged petrol, there is real headroom here, and this transformative gain shows up mainly as a broader, more responsive power band rather than one dramatic jump. These figures apply to 2018 models.

Typical remap gains for the TT 45 TFSI 245HP

Power (Horsepower)
Standard vs Remapped
STANDARD 245 BHP

TUNED → 320 BHP

Torque
Standard vs Remapped
STANDARD 370 NM

TUNED → 450 NM

+75 BHPPower gained
+30.6%BHP increase
+80 NmTorque gained
+21.6%Torque increase

  • Power: 245bhp standard, 320bhp after a Stage 1 remap.
  • Torque: 370Nm standard, 450Nm after a Stage 1 remap.
  • This is a power-led gain: BHP increases by more than torque, widening the usable power band rather than boosting low-end pull.
  • This is a turbocharged engine, which typically means further headroom exists beyond Stage 1 if hardware is upgraded.
  • As a petrol engine, the practical benefit is mainly felt as sharper throttle response and a broader power band.
  • These figures apply specifically to 2018 models.
  • These are Stage 1 figures only, achieved without any hardware changes.

Questions about remapping your TT 45 TFSI 245HP

How much power and torque does a Stage 1 remap add to the Audi TT (2018) 45 TFSI 245HP?

A Stage 1 remap typically takes the Audi TT (2018) 45 TFSI 245HP from 245bhp to around 320bhp, and torque from 370Nm to around 450Nm. This is a transformative gain achieved entirely through software, with no hardware changes required.

Is the Audi TT (2018) 45 TFSI 245HP a good candidate for remapping?

Generally, yes: as a turbocharged engine it has the headroom to respond well to a quality remap, and the transformative gain shown here reflects that. The main caveats are condition, not the engine itself, a healthy service history, no outstanding fault codes, and (for diesels) a clear DPF and EGR are what actually determine whether this particular car is ready for a remap.

Will remapping affect the warranty on my Audi TT (2018)?

A manufacturer can only void the parts of a warranty that the remap directly affects, not the entire vehicle, under the Consumer Rights Act and EU Block Exemption principles. In practice, on a Audi TT (2018) 45 TFSI 245HP this usually means engine and transmission-related claims are the ones worth discussing with a reputable tuner before booking.

What should I check before booking a remap for my Audi TT (2018) 45 TFSI 245HP?

Before booking, confirm the tuner uses a custom or bespoke file rather than a generic off-the-shelf map, ask whether they do a pre-remap health check, and check service history and mileage on your specific Audi TT (2018).

What's the difference between a Stage 1 and Stage 2 remap for the 45 TFSI 245HP?

Stage 1 is software-only and is what the figures on this page reflect. Stage 2 builds on that, but on a turbocharged engine like this, Stage 2 usually adds further gains but requires supporting hardware such as an upgraded intake or exhaust, so it is a separate conversation with a tuner rather than an automatic next step.

Will remapping my Audi TT (2018) affect my insurance?

Yes, always, a remap is a modification and must be declared to your insurer regardless of size. Given this transformative gain on the 45 TFSI 245HP, expect a likely premium increase, and it is worth getting a quote from a specialist modified-vehicle insurer before booking the remap itself.