Remapping the Dodge Avenger (2007-2010), 2.4 – 173HP.
On the Dodge Avenger (2007-2010), the 2.4 – 173HP responds to remapping mainly through extra BHP, broadening the usable rev range, with power up 12.7% to 195bhp and torque following at a gentler 8.9% to 245Nm.
As a naturally aspirated petrol, gains are more modest by nature, and this worthwhile improvement is best appreciated as sharper throttle response rather than a transformed power band. These figures apply to 2007-2010 models.
Typical remap gains for the Avenger 2.4 – 173HP
Standard vs Remapped
Standard vs Remapped
- Power: 173bhp standard, 195bhp after a Stage 1 remap.
- Torque: 225Nm standard, 245Nm after a Stage 1 remap.
- This is a power-led gain: BHP increases by more than torque, widening the usable power band rather than boosting low-end pull.
- This is a naturally aspirated engine, so headroom beyond Stage 1 is limited compared with a turbocharged equivalent.
- As a petrol engine, the practical benefit is mainly felt as sharper throttle response and a broader power band.
- These figures apply specifically to 2007-2010 models.
- These are Stage 1 figures only, achieved without any hardware changes.
Questions about remapping your Avenger 2.4 – 173HP
How much power and torque does a Stage 1 remap add to the Dodge Avenger (2007-2010) 2.4 – 173HP?
A Stage 1 remap typically takes the Dodge Avenger (2007-2010) 2.4 – 173HP from 173bhp to around 195bhp, and torque from 225Nm to around 245Nm. This is a worthwhile gain achieved entirely through software, with no hardware changes required.
Is the Dodge Avenger (2007-2010) 2.4 – 173HP a good candidate for remapping?
Generally, yes: as a naturally aspirated engine its headroom is more limited, though a well-executed remap can still sharpen throttle response, and the worthwhile gain shown here reflects that. The main caveats are condition, not the engine itself, a healthy service history, no outstanding fault codes, and (for diesels) a clear DPF and EGR are what actually determine whether this particular car is ready for a remap.
Will remapping affect the warranty on my Dodge Avenger (2007-2010)?
A manufacturer can only void the parts of a warranty that the remap directly affects, not the entire vehicle, under the Consumer Rights Act and EU Block Exemption principles. In practice, on a Dodge Avenger (2007-2010) 2.4 – 173HP this usually means engine and transmission-related claims are the ones worth discussing with a reputable tuner before booking.
What should I check before booking a remap for my Dodge Avenger (2007-2010) 2.4 – 173HP?
Before booking, confirm the tuner uses a custom or bespoke file rather than a generic off-the-shelf map, ask whether they do a pre-remap health check, and check service history and mileage on your specific Dodge Avenger (2007-2010).
What's the difference between a Stage 1 and Stage 2 remap for the 2.4 – 173HP?
Stage 1 is software-only and is what the figures on this page reflect. Stage 2 builds on that, but on a naturally aspirated engine like this, the scope for a Stage 2 remap is limited, since there is little forced induction to work with, so it is a separate conversation with a tuner rather than an automatic next step.
Will remapping my Dodge Avenger (2007-2010) affect my insurance?
Yes, always, a remap is a modification and must be declared to your insurer regardless of size. Given this worthwhile gain on the 2.4 – 173HP, expect a likely premium increase, and it is worth getting a quote from a specialist modified-vehicle insurer before booking the remap itself.