Remapping Data - Engine Remap Performance and Torque Gains

Remapping the Jaguar F Pace (2015), 3.0 V6 Supercharged 380HP.

The Jaguar F Pace (2015)'s 3.0 V6 Supercharged 380HP sees a torque-led Stage 1 remap: pulling power climbs 11.1% to 500Nm, well ahead of the 5.3% rise in BHP from 380 to 400.

As a naturally aspirated petrol, gains are more modest by nature, and this worthwhile improvement is best appreciated as sharper throttle response rather than a transformed power band. These figures apply to 2015 models.

Typical remap gains for the F Pace 3.0 V6 Supercharged 380HP

Power (Horsepower)
Standard vs Remapped
STANDARD 380 BHP

TUNED → 400 BHP

Torque
Standard vs Remapped
STANDARD 450 NM

TUNED → 500 NM

+20 BHPPower gained
+5.3%BHP increase
+50 NmTorque gained
+11.1%Torque increase

  • Power: 380bhp standard, 400bhp after a Stage 1 remap.
  • Torque: 450Nm standard, 500Nm after a Stage 1 remap.
  • This is a torque-led gain: pulling power increases by more than BHP, which is felt mainly as a stronger mid-range.
  • This is a naturally aspirated engine, so headroom beyond Stage 1 is limited compared with a turbocharged equivalent.
  • As a petrol engine, the practical benefit is mainly felt as sharper throttle response and a broader power band.
  • These figures apply specifically to 2015 models.
  • These are Stage 1 figures only, achieved without any hardware changes.

Questions about remapping your F Pace 3.0 V6 Supercharged 380HP

How much power and torque does a Stage 1 remap add to the Jaguar F Pace (2015) 3.0 V6 Supercharged 380HP?

A Stage 1 remap typically takes the Jaguar F Pace (2015) 3.0 V6 Supercharged 380HP from 380bhp to around 400bhp, and torque from 450Nm to around 500Nm. This is a worthwhile gain achieved entirely through software, with no hardware changes required.

Is the Jaguar F Pace (2015) 3.0 V6 Supercharged 380HP a good candidate for remapping?

Generally, yes: as a naturally aspirated engine its headroom is more limited, though a well-executed remap can still sharpen throttle response, and the worthwhile gain shown here reflects that. The main caveats are condition, not the engine itself, a healthy service history, no outstanding fault codes, and (for diesels) a clear DPF and EGR are what actually determine whether this particular car is ready for a remap.

Will remapping affect the warranty on my Jaguar F Pace (2015)?

A manufacturer can only void the parts of a warranty that the remap directly affects, not the entire vehicle, under the Consumer Rights Act and EU Block Exemption principles. In practice, on a Jaguar F Pace (2015) 3.0 V6 Supercharged 380HP this usually means engine and transmission-related claims are the ones worth discussing with a reputable tuner before booking.

What should I check before booking a remap for my Jaguar F Pace (2015) 3.0 V6 Supercharged 380HP?

Before booking, confirm the tuner uses a custom or bespoke file rather than a generic off-the-shelf map, ask whether they do a pre-remap health check, and check service history and mileage on your specific Jaguar F Pace (2015).

What's the difference between a Stage 1 and Stage 2 remap for the 3.0 V6 Supercharged 380HP?

Stage 1 is software-only and is what the figures on this page reflect. Stage 2 builds on that, but on a naturally aspirated engine like this, the scope for a Stage 2 remap is limited, since there is little forced induction to work with, so it is a separate conversation with a tuner rather than an automatic next step.

Will remapping my Jaguar F Pace (2015) affect my insurance?

Yes, always, a remap is a modification and must be declared to your insurer regardless of size. Given this worthwhile gain on the 3.0 V6 Supercharged 380HP, expect a likely premium increase, and it is worth getting a quote from a specialist modified-vehicle insurer before booking the remap itself.