Remapping Data - Engine Remap Performance and Torque Gains

Remapping the Jaguar X Type, 2.0D 130HP.

On the Jaguar X Type, the 2.0D 130HP responds to remapping mainly through extra BHP, broadening the usable rev range, with power up 27.7% to 166bhp and torque following at a gentler 15.2% to 380Nm.

As a naturally aspirated diesel, the headroom here is more limited than a turbocharged equivalent, but this transformative gain is still a genuine, usable improvement in everyday pulling power.

Typical remap gains for the X Type 2.0D 130HP

Power (Horsepower)
Standard vs Remapped
STANDARD 130 BHP

TUNED → 166 BHP

Torque
Standard vs Remapped
STANDARD 330 NM

TUNED → 380 NM

+36 BHPPower gained
+27.7%BHP increase
+50 NmTorque gained
+15.2%Torque increase

  • Power: 130bhp standard, 166bhp after a Stage 1 remap.
  • Torque: 330Nm standard, 380Nm after a Stage 1 remap.
  • This is a power-led gain: BHP increases by more than torque, widening the usable power band rather than boosting low-end pull.
  • This is a naturally aspirated engine, so headroom beyond Stage 1 is limited compared with a turbocharged equivalent.
  • As a diesel, the practical benefit is mainly felt as stronger pulling power for towing and motorway overtaking.
  • These are Stage 1 figures only, achieved without any hardware changes.

Questions about remapping your X Type 2.0D 130HP

How much power and torque does a Stage 1 remap add to the Jaguar X Type 2.0D 130HP?

A Stage 1 remap typically takes the Jaguar X Type 2.0D 130HP from 130bhp to around 166bhp, and torque from 330Nm to around 380Nm. This is a transformative gain achieved entirely through software, with no hardware changes required.

Is the Jaguar X Type 2.0D 130HP a good candidate for remapping?

Generally, yes: as a naturally aspirated engine its headroom is more limited, though a well-executed remap can still sharpen throttle response, and the transformative gain shown here reflects that. The main caveats are condition, not the engine itself, a healthy service history, no outstanding fault codes, and (for diesels) a clear DPF and EGR are what actually determine whether this particular car is ready for a remap.

Will remapping affect the warranty on my Jaguar X Type?

A manufacturer can only void the parts of a warranty that the remap directly affects, not the entire vehicle, under the Consumer Rights Act and EU Block Exemption principles. In practice, on a Jaguar X Type 2.0D 130HP this usually means engine and transmission-related claims are the ones worth discussing with a reputable tuner before booking.

What should I check before booking a remap for my Jaguar X Type 2.0D 130HP?

Before booking, confirm the tuner uses a custom or bespoke file rather than a generic off-the-shelf map, ask whether they do a pre-remap health check, and check service history and mileage on your specific Jaguar X Type. For a diesel like this one, also check the DPF and EGR are in good working order, since a generic remap on a struggling emissions system is where problems tend to start.

What's the difference between a Stage 1 and Stage 2 remap for the 2.0D 130HP?

Stage 1 is software-only and is what the figures on this page reflect. Stage 2 builds on that, but on a naturally aspirated engine like this, the scope for a Stage 2 remap is limited, since there is little forced induction to work with, so it is a separate conversation with a tuner rather than an automatic next step.

Will remapping my Jaguar X Type affect my insurance?

Yes, always, a remap is a modification and must be declared to your insurer regardless of size. Given this transformative gain on the 2.0D 130HP, expect a likely premium increase, and it is worth getting a quote from a specialist modified-vehicle insurer before booking the remap itself.