Mercedes-Benz engine remapping BHP and Torque gains

Remapping the Mercedes-Benz CLA (2016-2019), 45 AMG 381HP.

Remapping the 45 AMG 381HP in the Mercedes-Benz CLA (2016-2019) lifts torque from 475Nm to 540Nm, a 13.7% increase that noticeably outpaces the 10.2% gain in BHP (381 to 420bhp).

As a naturally aspirated petrol, gains are more modest by nature, and this worthwhile improvement is best appreciated as sharper throttle response rather than a transformed power band. These figures apply to 2016-2019 models.

Typical remap gains for the CLA 45 AMG 381HP

Power (Horsepower)
Standard vs Remapped
STANDARD 381 BHP

TUNED → 420 BHP

Torque
Standard vs Remapped
STANDARD 475 NM

TUNED → 540 NM

+39 BHPPower gained
+10.2%BHP increase
+65 NmTorque gained
+13.7%Torque increase

  • Power: 381bhp standard, 420bhp after a Stage 1 remap.
  • Torque: 475Nm standard, 540Nm after a Stage 1 remap.
  • This is a torque-led gain: pulling power increases by more than BHP, which is felt mainly as a stronger mid-range.
  • This is a naturally aspirated engine, so headroom beyond Stage 1 is limited compared with a turbocharged equivalent.
  • As a petrol engine, the practical benefit is mainly felt as sharper throttle response and a broader power band.
  • These figures apply specifically to 2016-2019 models.
  • These are Stage 1 figures only, achieved without any hardware changes.

Questions about remapping your CLA 45 AMG 381HP

How much power and torque does a Stage 1 remap add to the Mercedes-Benz CLA (2016-2019) 45 AMG 381HP?

A Stage 1 remap typically takes the Mercedes-Benz CLA (2016-2019) 45 AMG 381HP from 381bhp to around 420bhp, and torque from 475Nm to around 540Nm. This is a worthwhile gain achieved entirely through software, with no hardware changes required.

Is the Mercedes-Benz CLA (2016-2019) 45 AMG 381HP a good candidate for remapping?

Generally, yes: as a naturally aspirated engine its headroom is more limited, though a well-executed remap can still sharpen throttle response, and the worthwhile gain shown here reflects that. The main caveats are condition, not the engine itself, a healthy service history, no outstanding fault codes, and (for diesels) a clear DPF and EGR are what actually determine whether this particular car is ready for a remap.

Will remapping affect the warranty on my Mercedes-Benz CLA (2016-2019)?

A manufacturer can only void the parts of a warranty that the remap directly affects, not the entire vehicle, under the Consumer Rights Act and EU Block Exemption principles. In practice, on a Mercedes-Benz CLA (2016-2019) 45 AMG 381HP this usually means engine and transmission-related claims are the ones worth discussing with a reputable tuner before booking.

What should I check before booking a remap for my Mercedes-Benz CLA (2016-2019) 45 AMG 381HP?

Before booking, confirm the tuner uses a custom or bespoke file rather than a generic off-the-shelf map, ask whether they do a pre-remap health check, and check service history and mileage on your specific Mercedes-Benz CLA (2016-2019).

What's the difference between a Stage 1 and Stage 2 remap for the 45 AMG 381HP?

Stage 1 is software-only and is what the figures on this page reflect. Stage 2 builds on that, but on a naturally aspirated engine like this, the scope for a Stage 2 remap is limited, since there is little forced induction to work with, so it is a separate conversation with a tuner rather than an automatic next step.

Will remapping my Mercedes-Benz CLA (2016-2019) affect my insurance?

Yes, always, a remap is a modification and must be declared to your insurer regardless of size. Given this worthwhile gain on the 45 AMG 381HP, expect a likely premium increase, and it is worth getting a quote from a specialist modified-vehicle insurer before booking the remap itself.