Mercedes-Benz engine remapping BHP and Torque gains

Remapping the Mercedes-Benz E (2009-2013), 63 AMG PPK 557HP.

The Mercedes-Benz E (2009-2013)'s 63 AMG PPK 557HP sees a torque-led Stage 1 remap: pulling power climbs 25% to 900Nm, well ahead of the 11.3% rise in BHP from 557 to 620.

As a naturally aspirated petrol, gains are more modest by nature, and this impressive improvement is best appreciated as sharper throttle response rather than a transformed power band. These figures apply to 2009-2013 models.

Typical remap gains for the E 63 AMG PPK 557HP

Power (Horsepower)
Standard vs Remapped
STANDARD 557 BHP

TUNED → 620 BHP

Torque
Standard vs Remapped
STANDARD 720 NM

TUNED → 900 NM

+63 BHPPower gained
+11.3%BHP increase
+180 NmTorque gained
+25.0%Torque increase

  • Power: 557bhp standard, 620bhp after a Stage 1 remap.
  • Torque: 720Nm standard, 900Nm after a Stage 1 remap.
  • This is a torque-led gain: pulling power increases by more than BHP, which is felt mainly as a stronger mid-range.
  • This is a naturally aspirated engine, so headroom beyond Stage 1 is limited compared with a turbocharged equivalent.
  • As a petrol engine, the practical benefit is mainly felt as sharper throttle response and a broader power band.
  • These figures apply specifically to 2009-2013 models.
  • These are Stage 1 figures only, achieved without any hardware changes.

Questions about remapping your E 63 AMG PPK 557HP

How much power and torque does a Stage 1 remap add to the Mercedes-Benz E (2009-2013) 63 AMG PPK 557HP?

A Stage 1 remap typically takes the Mercedes-Benz E (2009-2013) 63 AMG PPK 557HP from 557bhp to around 620bhp, and torque from 720Nm to around 900Nm. This is a impressive gain achieved entirely through software, with no hardware changes required.

Is the Mercedes-Benz E (2009-2013) 63 AMG PPK 557HP a good candidate for remapping?

Generally, yes: as a naturally aspirated engine its headroom is more limited, though a well-executed remap can still sharpen throttle response, and the impressive gain shown here reflects that. The main caveats are condition, not the engine itself, a healthy service history, no outstanding fault codes, and (for diesels) a clear DPF and EGR are what actually determine whether this particular car is ready for a remap.

Will remapping affect the warranty on my Mercedes-Benz E (2009-2013)?

A manufacturer can only void the parts of a warranty that the remap directly affects, not the entire vehicle, under the Consumer Rights Act and EU Block Exemption principles. In practice, on a Mercedes-Benz E (2009-2013) 63 AMG PPK 557HP this usually means engine and transmission-related claims are the ones worth discussing with a reputable tuner before booking.

What should I check before booking a remap for my Mercedes-Benz E (2009-2013) 63 AMG PPK 557HP?

Before booking, confirm the tuner uses a custom or bespoke file rather than a generic off-the-shelf map, ask whether they do a pre-remap health check, and check service history and mileage on your specific Mercedes-Benz E (2009-2013).

What's the difference between a Stage 1 and Stage 2 remap for the 63 AMG PPK 557HP?

Stage 1 is software-only and is what the figures on this page reflect. Stage 2 builds on that, but on a naturally aspirated engine like this, the scope for a Stage 2 remap is limited, since there is little forced induction to work with, so it is a separate conversation with a tuner rather than an automatic next step.

Will remapping my Mercedes-Benz E (2009-2013) affect my insurance?

Yes, always, a remap is a modification and must be declared to your insurer regardless of size. Given this impressive gain on the 63 AMG PPK 557HP, expect a likely premium increase, and it is worth getting a quote from a specialist modified-vehicle insurer before booking the remap itself.