Remapping Data - Engine Remap Performance and Torque Gains

Remapping the Peugeot 207 (2006), 1.6 THP 150HP.

A Stage 1 remap on the 1.6 THP 150HP in the Peugeot 207 (2006) lifts power and pulling power in equal measure, taking BHP from 150 to 185bhp (+23.3%) and torque from 240 to 300Nm (+25%).

As a turbocharged petrol, there is real headroom here, and this impressive gain shows up mainly as a broader, more responsive power band rather than one dramatic jump. These figures apply to 2006 models.

Typical remap gains for the 207 1.6 THP 150HP

Power (Horsepower)
Standard vs Remapped
STANDARD 150 BHP

TUNED → 185 BHP

Torque
Standard vs Remapped
STANDARD 240 NM

TUNED → 300 NM

+35 BHPPower gained
+23.3%BHP increase
+60 NmTorque gained
+25.0%Torque increase

  • Power: 150bhp standard, 185bhp after a Stage 1 remap.
  • Torque: 240Nm standard, 300Nm after a Stage 1 remap.
  • This is a balanced gain: power and torque increase by a similar margin, rather than one outpacing the other.
  • This is a turbocharged engine, which typically means further headroom exists beyond Stage 1 if hardware is upgraded.
  • As a petrol engine, the practical benefit is mainly felt as sharper throttle response and a broader power band.
  • These figures apply specifically to 2006 models.
  • These are Stage 1 figures only, achieved without any hardware changes.

Questions about remapping your 207 1.6 THP 150HP

How much power and torque does a Stage 1 remap add to the Peugeot 207 (2006) 1.6 THP 150HP?

A Stage 1 remap typically takes the Peugeot 207 (2006) 1.6 THP 150HP from 150bhp to around 185bhp, and torque from 240Nm to around 300Nm. This is a impressive gain achieved entirely through software, with no hardware changes required.

Is the Peugeot 207 (2006) 1.6 THP 150HP a good candidate for remapping?

Generally, yes: as a turbocharged engine it has the headroom to respond well to a quality remap, and the impressive gain shown here reflects that. The main caveats are condition, not the engine itself, a healthy service history, no outstanding fault codes, and (for diesels) a clear DPF and EGR are what actually determine whether this particular car is ready for a remap.

Will remapping affect the warranty on my Peugeot 207 (2006)?

A manufacturer can only void the parts of a warranty that the remap directly affects, not the entire vehicle, under the Consumer Rights Act and EU Block Exemption principles. In practice, on a Peugeot 207 (2006) 1.6 THP 150HP this usually means engine and transmission-related claims are the ones worth discussing with a reputable tuner before booking.

What should I check before booking a remap for my Peugeot 207 (2006) 1.6 THP 150HP?

Before booking, confirm the tuner uses a custom or bespoke file rather than a generic off-the-shelf map, ask whether they do a pre-remap health check, and check service history and mileage on your specific Peugeot 207 (2006).

What's the difference between a Stage 1 and Stage 2 remap for the 1.6 THP 150HP?

Stage 1 is software-only and is what the figures on this page reflect. Stage 2 builds on that, but on a turbocharged engine like this, Stage 2 usually adds further gains but requires supporting hardware such as an upgraded intake or exhaust, so it is a separate conversation with a tuner rather than an automatic next step.

Will remapping my Peugeot 207 (2006) affect my insurance?

Yes, always, a remap is a modification and must be declared to your insurer regardless of size. Given this impressive gain on the 1.6 THP 150HP, expect a likely premium increase, and it is worth getting a quote from a specialist modified-vehicle insurer before booking the remap itself.