Remapping the Peugeot 308 (2007-2013), 2.0 HDi 163HP.
A Stage 1 remap on the 2.0 HDi 163HP in the Peugeot 308 (2007-2013) lifts power and pulling power in equal measure, taking BHP from 163 to 190bhp (+16.6%) and torque from 340 to 400Nm (+17.6%).
As a turbocharged diesel, this is exactly the kind of engine that responds well to remapping, and a impressive gain like this translates into stronger motorway pulling power and easier overtaking. These figures apply to 2007-2013 models.
Typical remap gains for the 308 2.0 HDi 163HP
Standard vs Remapped
Standard vs Remapped
- Power: 163bhp standard, 190bhp after a Stage 1 remap.
- Torque: 340Nm standard, 400Nm after a Stage 1 remap.
- This is a balanced gain: power and torque increase by a similar margin, rather than one outpacing the other.
- This is a turbocharged engine, which typically means further headroom exists beyond Stage 1 if hardware is upgraded.
- As a diesel, the practical benefit is mainly felt as stronger pulling power for towing and motorway overtaking.
- These figures apply specifically to 2007-2013 models.
- These are Stage 1 figures only, achieved without any hardware changes.
Questions about remapping your 308 2.0 HDi 163HP
How much power and torque does a Stage 1 remap add to the Peugeot 308 (2007-2013) 2.0 HDi 163HP?
A Stage 1 remap typically takes the Peugeot 308 (2007-2013) 2.0 HDi 163HP from 163bhp to around 190bhp, and torque from 340Nm to around 400Nm. This is a impressive gain achieved entirely through software, with no hardware changes required.
Is the Peugeot 308 (2007-2013) 2.0 HDi 163HP a good candidate for remapping?
Generally, yes: as a turbocharged engine it has the headroom to respond well to a quality remap, and the impressive gain shown here reflects that. The main caveats are condition, not the engine itself, a healthy service history, no outstanding fault codes, and (for diesels) a clear DPF and EGR are what actually determine whether this particular car is ready for a remap.
Will remapping affect the warranty on my Peugeot 308 (2007-2013)?
A manufacturer can only void the parts of a warranty that the remap directly affects, not the entire vehicle, under the Consumer Rights Act and EU Block Exemption principles. In practice, on a Peugeot 308 (2007-2013) 2.0 HDi 163HP this usually means engine and transmission-related claims are the ones worth discussing with a reputable tuner before booking.
What should I check before booking a remap for my Peugeot 308 (2007-2013) 2.0 HDi 163HP?
Before booking, confirm the tuner uses a custom or bespoke file rather than a generic off-the-shelf map, ask whether they do a pre-remap health check, and check service history and mileage on your specific Peugeot 308 (2007-2013). For a diesel like this one, also check the DPF and EGR are in good working order, since a generic remap on a struggling emissions system is where problems tend to start.
What's the difference between a Stage 1 and Stage 2 remap for the 2.0 HDi 163HP?
Stage 1 is software-only and is what the figures on this page reflect. Stage 2 builds on that, but on a turbocharged engine like this, Stage 2 usually adds further gains but requires supporting hardware such as an upgraded intake or exhaust, so it is a separate conversation with a tuner rather than an automatic next step.
Will remapping my Peugeot 308 (2007-2013) affect my insurance?
Yes, always, a remap is a modification and must be declared to your insurer regardless of size. Given this impressive gain on the 2.0 HDi 163HP, expect a likely premium increase, and it is worth getting a quote from a specialist modified-vehicle insurer before booking the remap itself.