Škoda remapping gains; improved BHP and Torque.

Remapping the Skoda Karoq (2017), 1.0 TSI 115HP.

A Stage 1 remap on the 1.0 TSI 115HP in the Skoda Karoq (2017) lifts power and pulling power in equal measure, taking BHP from 115 to 140bhp (+21.7%) and torque from 200 to 240Nm (+20%).

As a turbocharged petrol, there is real headroom here, and this impressive gain shows up mainly as a broader, more responsive power band rather than one dramatic jump. These figures apply to 2017 models.

Typical remap gains for the Karoq 1.0 TSI 115HP

Power (Horsepower)
Standard vs Remapped
STANDARD 115 BHP

TUNED → 140 BHP

Torque
Standard vs Remapped
STANDARD 200 NM

TUNED → 240 NM

+25 BHPPower gained
+21.7%BHP increase
+40 NmTorque gained
+20.0%Torque increase

  • Power: 115bhp standard, 140bhp after a Stage 1 remap.
  • Torque: 200Nm standard, 240Nm after a Stage 1 remap.
  • This is a balanced gain: power and torque increase by a similar margin, rather than one outpacing the other.
  • This is a turbocharged engine, which typically means further headroom exists beyond Stage 1 if hardware is upgraded.
  • As a petrol engine, the practical benefit is mainly felt as sharper throttle response and a broader power band.
  • These figures apply specifically to 2017 models.
  • These are Stage 1 figures only, achieved without any hardware changes.

Questions about remapping your Karoq 1.0 TSI 115HP

How much power and torque does a Stage 1 remap add to the Skoda Karoq (2017) 1.0 TSI 115HP?

A Stage 1 remap typically takes the Skoda Karoq (2017) 1.0 TSI 115HP from 115bhp to around 140bhp, and torque from 200Nm to around 240Nm. This is a impressive gain achieved entirely through software, with no hardware changes required.

Is the Skoda Karoq (2017) 1.0 TSI 115HP a good candidate for remapping?

Generally, yes: as a turbocharged engine it has the headroom to respond well to a quality remap, and the impressive gain shown here reflects that. The main caveats are condition, not the engine itself, a healthy service history, no outstanding fault codes, and (for diesels) a clear DPF and EGR are what actually determine whether this particular car is ready for a remap.

Will remapping affect the warranty on my Skoda Karoq (2017)?

A manufacturer can only void the parts of a warranty that the remap directly affects, not the entire vehicle, under the Consumer Rights Act and EU Block Exemption principles. In practice, on a Skoda Karoq (2017) 1.0 TSI 115HP this usually means engine and transmission-related claims are the ones worth discussing with a reputable tuner before booking.

What should I check before booking a remap for my Skoda Karoq (2017) 1.0 TSI 115HP?

Before booking, confirm the tuner uses a custom or bespoke file rather than a generic off-the-shelf map, ask whether they do a pre-remap health check, and check service history and mileage on your specific Skoda Karoq (2017).

What's the difference between a Stage 1 and Stage 2 remap for the 1.0 TSI 115HP?

Stage 1 is software-only and is what the figures on this page reflect. Stage 2 builds on that, but on a turbocharged engine like this, Stage 2 usually adds further gains but requires supporting hardware such as an upgraded intake or exhaust, so it is a separate conversation with a tuner rather than an automatic next step.

Will remapping my Skoda Karoq (2017) affect my insurance?

Yes, always, a remap is a modification and must be declared to your insurer regardless of size. Given this impressive gain on the 1.0 TSI 115HP, expect a likely premium increase, and it is worth getting a quote from a specialist modified-vehicle insurer before booking the remap itself.